S15P28
“S” denotes the veneer thickness, “P” the batten width. Milled from 16.8 mm thick-cut veneer; the batten width is 28 mm. The profile is triangular-rounded. Available formats: Sheet (approx. 17 mm) · FlexBoard (23 mm) · Board (33 mm)
Products
Design elements
Techno Veneer (Relief Boards)
Techno Veneer relief boards are milled primarily from ALPI thick-cut veneers.
01
Milled reliefs
Techno Veneer by 4Design
The defining feature of Techno Veneer is the milled surface – milled from ALPI thick-cut veneers, so that the same ALPI surfaces are also available in standard thickness for combinations of structured and smooth surfaces.
01
Sheet (TNT)
3130 × 1220 mm, milled ALPI thick-cut veneer, paper-fleece-backed on the reverse – the flexible base format.
02
FlexBoard
1000 × 1800 or 3000 × 1200 mm, with a fabric interlayer on 5 mm MDF – for two-dimensional forming of curves and bends.
03
Board (Rigid)
3000 × 1200 mm, milled thick-cut veneer on 15 mm MDF or plywood carrier with a compensating counter-veneer – the rigid variant.
02
Techno Veneer – the advantages
- Versatile applications: as a wall element, partition or room divider and as a furniture front.
- Various formats: available as Sheet, FlexBoard or Board depending on the article.
- Individual production: lacquering, black MDF, fire protection and more.
- Combinable: milled from ALPI thick-cut veneers that are also available in standard thickness for floors, walls and ceilings.
- Fire protection: available with fire-protection class B-s1,d0 on request.
03
Structure families
Batten, Milled and Wave
The defining feature of Techno Veneer is the milled surface from ALPI thick-cut veneer. Three structure families – Batten, Milled and Wave – cover the entire design spectrum from a fine, almost graphic texture to a bold, space-defining rib. Veneer thicknesses range from 2.8 to 16.8 mm.
Every structure is available in three formats: as a flexible Sheet (TNT), as a two-dimensionally formable FlexBoard, and as a rigid Board on an MDF or plywood carrier. This allows the same structure to be used on the wall, on a furniture front or as a freestanding partition – and combined with smooth ALPI surfaces in standard thickness.
The designations follow a simple logic: "S" stands for the veneer thickness, "P" for the batten or wave width, and "F" (for Milled) for the milling pitch. Exact dimensions for each article can be found in the product finder.
04
Catalogue
Batten structures
The S-series encompasses flat, bold and pointed-round batten profiles. Veneer thickness ranges from 2.8 mm (S3) to 16.8 mm (S15). Depending on the profile, available as Sheet, FlexBoard or Board.
S13P26
“S” denotes the veneer thickness, “P” the batten width. Milled from 11.2 mm thick-cut veneer; the batten width is 25.5 mm. The profile is boldly rounded. Available formats: Sheet (approx. 11.5 mm) · FlexBoard (17 mm) · Board (27 mm)
S11P37
“S” denotes the veneer thickness, “P” the batten width. Milled from 11.2 mm thick-cut veneer; the batten width is 37 mm. The profile is boldly rounded and flows smoothly into the next round. Available formats: Sheet (approx. 11.5 mm) · Board (27 mm)
S10P15
“S” denotes the veneer thickness, “P” the batten width. Milled from 8.4 mm thick-cut veneer; the batten width is 15 mm. The profile is pointed-rounded. Available formats: Sheet (approx. 9 mm) · FlexBoard (14 mm) · Board (24.4 mm)
S8P19
“S” denotes the veneer thickness, “P” the batten width. Technical data sheet and available formats on request.
S8P10
“S” denotes the veneer thickness, “P” the batten width. Technical data sheet and available formats on request.
S6P30
“S” denotes the veneer thickness, “P” the batten width. Technical data sheet and available formats on request.
S6P20
“S” denotes the veneer thickness, “P” the batten width. Milled from 5.6 mm thick-cut veneer; the batten width is 20 mm. The profile is boldly rounded. Available formats: Sheet (approx. 6 mm) · FlexBoard (12 mm) · Board (22 mm)
S6P15_3
“S” denotes the veneer thickness, “P” the batten width. Milled from 5.6 mm thick-cut veneer; the batten width is 18 mm. The profile is boldly rounded with a gap to the next round. Available formats: Sheet (approx. 6 mm) · Board (22 mm)
S6P13
“S” denotes the veneer thickness, “P” the batten width. Milled from 5.6 mm thick-cut veneer; the batten width is 13 mm. The profile is boldly rounded. Available formats: Sheet (approx. 6 mm) · FlexBoard (12 mm) · Board (22 mm)
S6P10 SP
“S” denotes the veneer thickness, “P” the batten width. Milled from 5.6 mm thick-cut veneer; the batten width is 10 mm. The profile is boldly rounded with a gap to the next round. Available formats: Sheet (approx. 6 mm) · Board (22 mm)
S6P10
“S” denotes the veneer thickness, “P” the batten width. Milled from 5.6 mm thick-cut veneer; the batten width is 10 mm. The profile is boldly rounded. Available formats: Sheet (approx. 6 mm) · FlexBoard (12 mm) · Board (22 mm)
S3P20
“S” denotes the veneer thickness, “P” the batten width. Milled from 2.8 mm thick-cut veneer; the batten width is 20 mm. The profile is flat-rounded. Available formats: Sheet (approx. 3 mm) · FlexBoard (9 mm) · Board (19 mm)
S3P15
“S” denotes the veneer thickness, “P” the batten width. Milled from 2.8 mm thick-cut veneer; the batten width is 15 mm. The profile is flat-rounded. Available formats: Sheet (approx. 3 mm) · FlexBoard (9 mm) · Board (19 mm)
S3P10
“S” denotes the veneer thickness, “P” the batten width. Milled from 2.8 mm thick-cut veneer; the batten width is 10 mm. The profile is flat-rounded. Available formats: Sheet (approx. 3 mm) · FlexBoard (9 mm) · Board (19 mm)
S3P7,5
“S” denotes the veneer thickness, “P” the batten width. Milled from 2.8 mm thick-cut veneer; the batten width is 7.5 mm. The profile is flat-rounded. Available formats: Sheet (approx. 3 mm) · FlexBoard (9 mm) · Board (19 mm)
S3P5
“S” denotes the veneer thickness, “P” the batten width. Milled from 2.8 mm thick-cut veneer; the batten width is 5 mm. The profile is flat-rounded. Available formats: Sheet (approx. 3 mm) · FlexBoard (9 mm) · Board (19 mm)
S3P3
“S” denotes the veneer thickness, “P” the batten width. Milled from 2.8 mm thick-cut veneer; the batten width is 5 mm. The profile is boldly rounded with a gap to the next round. Available formats: Sheet (approx. 3 mm) · Board (19 mm)
05
Catalogue
Milled structures
MILLED profiles are angular milled textures with a defined raised-element width (P) and milling pitch (F). The graphic precision of these textures is particularly suited to linear accent surfaces.
Milled PLUS
MILLED structures are angular textures: “P” is the width of the ridge, “F” the milling gap. Technical data sheet and available formats on request.
Milled P35F15
MILLED structures are angular textures: “P” is the width of the ridge, “F” the milling gap. Milled from 8.4 mm thick-cut veneer; the milling gap is 35 mm. The profile is angular. Available formats: Sheet (approx. 9 mm) · Board (24.4 mm)
Milled P35F15 Slim
MILLED structures are angular textures: “P” is the width of the ridge, “F” the milling gap. Slim is the shallower-milled version of the same structure. Technical data sheet and available formats on request.
Milled P35F15 Super Slim
MILLED structures are angular textures: “P” is the width of the ridge, “F” the milling gap. Super Slim is the shallowest version of this structure. Technical data sheet and available formats on request.
Milled P20F05
MILLED structures are angular textures: “P” is the width of the ridge, “F” the milling gap. Milled from 2.8 mm thick-cut veneer; the milling gap is 20 mm. The profile is bevelled angular. Available formats: Sheet (approx. 3 mm) · Board (19 mm)
Milled P12F12
MILLED structures are angular textures: “P” is the width of the ridge, “F” the milling gap. The profile is angular. Technical data sheet and available formats on request.
Milled P10F10
MILLED structures are angular textures: “P” is the width of the ridge, “F” the milling gap. Milled from 5.6 mm thick-cut veneer; the milling gap is 20 mm. The profile is angular. Available formats: Sheet (approx. 6 mm) · Board (22 mm)
Milled P10F10 Slim
MILLED structures are angular textures: “P” is the width of the ridge, “F” the milling gap. Slim is the shallower-milled version of the same structure. Technical data sheet and available formats on request.
Milled P6F06
MILLED structures are angular textures: “P” is the width of the ridge, “F” the milling gap. Milled from 5.6 mm thick-cut veneer; the milling gap is 12 mm. The profile is angular. Available formats: Sheet (approx. 6 mm) · Board (22 mm)
Milled P6F06 Slim
MILLED structures are angular textures: “P” is the width of the ridge, “F” the milling gap. Slim is the shallower-milled version of the same structure. Technical data sheet and available formats on request.
Milled P5F05
MILLED structures are angular textures: “P” is the width of the ridge, “F” the milling gap. Milled from 5.6 mm thick-cut veneer; the milling gap is 10 mm. The profile is angular. Available formats: Sheet (approx. 6 mm) · Board (22 mm)
Milled P5F05 Slim
MILLED structures are angular textures: “P” is the width of the ridge, “F” the milling gap. Slim is the shallower-milled version of the same structure. Technical data sheet and available formats on request.
Milled P4F04
MILLED structures are angular textures: “P” is the width of the ridge, “F” the milling gap. Milled from 5.6 mm thick-cut veneer; the milling gap is 8 mm. The profile is angular. Available formats: Sheet (approx. 6 mm) · Board (22 mm)
Milled P4F04 Slim
MILLED structures are angular textures: “P” is the width of the ridge, “F” the milling gap. Slim is the shallower-milled version of the same structure. Technical data sheet and available formats on request.
Milled P4/6/8/12
MILLED structures are angular textures: “P” is the width of the ridge, “F” the milling gap. Milled from 5.6 mm thick-cut veneer; the milling gap is 12 mm. The profile is angular with alternating dimensions. Available formats: Sheet (approx. 6 mm) · Board (22 mm)
Milled P3F03 Slim
MILLED structures are angular textures: “P” is the width of the ridge, “F” the milling gap. Slim is the shallower-milled version of the same structure. Technical data sheet and available formats on request.
06
Catalogue
Wave structures
WAVE profiles translate wave motion into milled veneer – from the fine P6.8 wave to the generous P37.5 sweep. WAVE Plus combines alternating pitches for particular liveliness.
Wave PLUS
WAVE structures are wave forms; “P” is the distance from crest to crest. Milled from 5.6 mm thick-cut veneer; the milling gap is 16 mm. The profile alternates between wave forms. Available formats: Sheet (approx. 6 mm) · Board (22 mm)
Wave P37
WAVE structures are wave forms; “P” is the distance from crest to crest. Technical data sheet and available formats on request.
Wave P37,5
WAVE structures are wave forms; “P” is the distance from crest to crest. Milled from 5.6 mm thick-cut veneer; the milling gap is 37.5 mm. The profile is wave-shaped with even spacing. Available formats: Sheet (approx. 6 mm) · Board (22 mm)
Wave P30R
WAVE structures are wave forms; “P” is the distance from crest to crest. Technical data sheet and available formats on request.
Wave P30
WAVE structures are wave forms; “P” is the distance from crest to crest. Milled from 5.6 mm thick-cut veneer; the milling gap is 30 mm. A flat surface with semi-circular grooves. Available formats: Sheet (approx. 6 mm) · Board (22 mm)
Wave P25
WAVE structures are wave forms; “P” is the distance from crest to crest. Milled from 2.8 mm thick-cut veneer; the milling gap is 25 mm. The wave form is elongated. Available formats: Sheet (approx. 3 mm) · Board (19 mm)
Wave P23,5
WAVE structures are wave forms; “P” is the distance from crest to crest. Milled from 5.6 mm thick-cut veneer; the milling gap is 23.5 mm. The profile is semi-circular with a wide gap. Available formats: Sheet (approx. 6 mm) · Board (22 mm)
Wave P22
WAVE structures are wave forms; “P” is the distance from crest to crest. Milled from 2.8 mm thick-cut veneer; the milling gap is 20 mm. The profile is pointed wave-shaped. Available formats: Sheet (approx. 3 mm) · Board (19 mm)
Wave P20_3
WAVE structures are wave forms; “P” is the distance from crest to crest. Milled from 11.2 mm thick-cut veneer; the milling gap is 23 mm. The profile is wave-shaped. Available formats: Sheet (approx. 11.5 mm) · Board (27 mm)
Wave P20
WAVE structures are wave forms; “P” is the distance from crest to crest. Milled from 5.6 mm thick-cut veneer; the milling gap is 20 mm. The profile is wave-shaped. Available formats: Sheet (approx. 6 mm) · Board (22 mm)
Wave P17
WAVE structures are wave forms; “P” is the distance from crest to crest. Milled from 5.6 mm thick-cut veneer; the milling gap is 17 mm. The profile is wave-shaped with even spacing. Available formats: Sheet (approx. 6 mm) · Board (22 mm)
Wave P16
WAVE structures are wave forms; “P” is the distance from crest to crest. Technical data sheet and available formats on request.
Wave P12/19
WAVE structures are wave forms; “P” is the distance from crest to crest. Milled from 5.6 mm thick-cut veneer; the milling gap is 19 mm. The profile is wave-shaped with alternating spacing. Available formats: Sheet (approx. 6 mm) · Board (22 mm)
Wave P9 Slim
WAVE structures are wave forms; “P” is the distance from crest to crest. Slim is the shallower-milled version of the same structure. Technical data sheet and available formats on request.
Wave P8
WAVE structures are wave forms; “P” is the distance from crest to crest. Milled from 5.6 mm thick-cut veneer; the milling gap is 8 mm. The profile is wave-shaped. Available formats: Sheet (approx. 6 mm) · Board (22 mm)
Wave P6,8
WAVE structures are wave forms; “P” is the distance from crest to crest. Technical data sheet and available formats on request.
07
Surfaces
Available ALPI surfaces
All Techno Veneer relief boards are milled from ALPI thick-cut veneers. The ten surfaces below form the standard palette – the same surfaces are also available as standard-thickness veneer for smooth surfaces, floors and combinations.
Next step
View samples and decors directly.
Open the product finder for colours, finishes and sample ordering.